Rite Price
Scott Bader Crystic 2-446PA-70 LSE Polyester Waxed Resin 225kg
Pickup available at Rite Price Industrial
Usually ready in 4 hours
Please note: This product is flammable and may incur additional shipping charges. Please phone 07 5574 5811 for details.
Crystic 2-446PA is a pre-accelerated, thixotropic, spray viscosity polyester resin with low styrene emission. Its rapid wetout, low exotherm and fast hardening characteristics make it ideal for spray applications which require a fast mould turn round. Variants giving a range of geltimes and viscosities are also available. During the spray-up phase, styrene emissions from Crystic 2-446PA are considerably reduced compared to normal spray applied resins. Levels significantly lower than current or proposed legislation can be attained. This reduction in styrene emission is achieved with no loss of interlaminar adhesion.
Approvals:
Crystic 2-446PA is approved by Det - Norske Veritas and by Lloyd’s Register of Shipping for use in the construction of craft under their survey. Formulation Crystic 2-446PA and its variants should be allowed to attain workshop temperature (18ºC - 20ºC) before use. They need only the addition of a catalyst to start the curing reaction. A colour change mechanism is incorporated into Crystic 2446PA and its variants, to indicate the presence of catalyst. After catalyst addition, the resins will change from blue to green, then to a yellowish colour, before gelation. The recommended catalyst is Catalyst M (or Butanox M50) which should be added at 1% or 2% into the resin. The geltime of Crystic 2-446PA can be approximately determined from the table below
The mould, resin and workshop should be at, or above, 15ºC before curing is carried out.
Additives:
Certain pigments, fillers or extra styrene may adversely affect the spraying and final properties of Crystic 2-446PA and its variants. Any additions should therefore be evaluated before any large scale use. Post Curing Satisfactory laminates for many applications can be made from Crystic 2-446PA and its variants, by curing at workshop temperature (20ºC). Some increase in properties may be obtained by post curing. The laminates should be allowed to cure for 24 hours at 20ºC, and then be oven cured for 16 hours at 40ºC.
Dispatch & Deliveries
When you make an order with Rite Price Distributors it’s important that you get the goods you need, for the right price, on time. That’s why we charge cost effective shipping rates that get your supplies to you as quickly and safely as possible.
For local orders in and around the Gold Coast we use Aramex Couriers for fast distribution.
For all other deliveries throughout Australia we use Australia Post.
Returns Policy
Our policy lasts 14 days. If 14 days have gone by since your purchase, unfortunately we can’t offer you a refund or exchange.
To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging.
To complete your return, we require a receipt or proof of purchase.
Please do not send your purchase back to the manufacturer.
There are certain situations where only partial refunds are granted: (if applicable)
- Any item not in its original condition, is damaged or missing parts for reasons not due to our error.
- Any item that is returned more than 14 days after delivery
Please call 07 5574 5811 to arrange payment and shipping for this item.
