Norglass

SKU: 1303 SKU: 1293 SKU: 1283 SKU: 1273 SKU: 1266

Norglass Liquid Glass Epoxy Resin Pack

$101.00 $81.24 Save 20%
Tax included.
Size: 750ml

Pickup available at Rite Price Industrial

Usually ready in 4 hours

A water clear pour-on glass finish for bars, table tops and decoupage applications. Gives that ‘liquid glass look.’ 

Excellent adhesion, abrasion resistance and flexibility. 

Can have colourants or metallic powers added to enhance your design.

Size
750ml, 1.5 litre, 3 litre, 6 litre, 15 litre, 30 litre
 
Mixing ratio
2:1
 
Application
Pour On

Liquid Glass is a high strength laminating resin with excellent waterproofing and adhesive properties.          

USES: To fill holes in most surfaces such as timber, or concrete, or for decoupage applications. 
PROPERTIES (at 20C)  
COLOUR:  Water -clear when mixed    
TOXICITY:  See Precautions  
FINISH:   Clear gloss  
COVERAGE: 1 litre of mixed liquid resin (1000cu centimetres) will cover 1m² x 1mm thick. Can vary according to reinforcing used and in pour-on applications.  
DRYING TIME:  1-2 hours (surface) 90% in 24 hours, 100% 7-10 days  
RECOATING:  24 hours  
POT LIFE: 1.5 litres of mixed resin will give a working time of 20-30 minutes in mass at 20°c, 40-50 minutes if volume is spread out into a shallow tray or dish.  If a smaller quantity is mixed (i.e.100ml) the mixed mass should be left for a minimum of 30 mins before pouring.  
MIXING RATIO:  2:1 by volume  
THINNING:  N/A 
WEIGHT/LITRE:  1.066 (mixed material)  VOLUME SOLIDS:   86% (mixed materials)   FLASH POINT:  > 155°C  
CLEAN UP:  NORGLASS EPOXY THINNER  
U.N. NUMBER:  Base 3082, Hardener 2735  
PREPARATION:  Refer to NORGLASS LIQUID GLASS Information Guide  

APPLICATION:  For pour on applications calculate the square area to be covered in centimetres, then use the following calculation to ascertain the volume required.   1 mixed litre = 1000 cubic centimeters’ (i.e. this will cover 1 square metre at one millimeter thickness).      
When applying to a horizontal surface (i.e tabletop / bartop) observe the area prior to  
mixing. If cracks or knot holes are present, mix a small quantity of liquid glass and brush coat these first, to avoid air pockets occurring, and allow to cure overnight before doing the final pour. If bubbles appear during this application wave a hot air gun over the area at a distance of about 30 cm until the air bubbles rise through the film. 
Dispatch & Deliveries

When you make an order with Rite Price Distributors it’s important that you get the goods you need, for the right price, on time. That’s why we charge cost effective shipping rates that get your supplies to you as quickly and safely as possible.

For local orders in and around the Gold Coast we use Aramex Couriers for fast distribution.

For all other deliveries throughout Australia we use Australia Post.

Returns Policy

Our policy lasts 14 days. If 14 days have gone by since your purchase, unfortunately we can’t offer you a refund or exchange.

To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging.

To complete your return, we require a receipt or proof of purchase.

Please do not send your purchase back to the manufacturer.

There are certain situations where only partial refunds are granted: (if applicable)

  • Any item not in its original condition, is damaged or missing parts for reasons not due to our error.
  • Any item that is returned more than 14 days after delivery

Read More Here

Size: 750ml
Celebrating 40 Years In Business

We've been providing wholesale industrial supplies to SEQ for over 40 years.

Locally Owned & Operated

When you support us, you are supporting Gold Coasters and their families.

We Stock Over 5000 Products

Not only do we have over 5000 products, we have access to over 200 suppliers.

Wholesale Prices & Bulk Buy Discounts

Give us a competitors advertised or quoted price, in writing, and we will try and beat it!